3Cr12 Stainless Steel Plate

Jual stainless steel 3Cr12 plate &sheet dengan berbagai ukuran& ketebalan.


3CR12, a registered trade mark of Stainless steel product, is a weldable chromium containing utility stainless steel, with a fine grained duplex ferritic-martensitic microstructure.

Stainless steel 3CR12 is a proprietary modification of Grade 409 chromium stainless steel. It has been developed as a readily fabricated, low cost grade, exhibiting good resistance to wet abrasion and mildly corrosive environments. National specifications cover this grade by designations 1.4003 and UNS S40977 / S41003.

Proprietary 3CR12 conforms to EN 10088.2 grade 1.4003, ASTM A240/ A240M grades UNS S40977 and S41003 and ASME SA240 grades UNS S40977 and S41003. 1.4003 is also included in EN 10028.7 covering stainless steels for pressure purposes.


Like other chromium stainless steel, 3CR12 has useful strength at temperature about 600oC. This ele vated temperature strength is significantly higher than that of plain-carbon steels. Hot working can be carried out at 700ºC – 800ºC without significantly affecting subsequent mechanical properties. Above 850ºC, 3CR12 behaves superplastically due to the fine grained duplex microstructure.

Chemical Composition

C Si Mn P S Ni Cr Ti N
0.03 Max 0.1 Max 0.15 Max 0.40 Max 0.03 Max 1.5 Max 10.5 – 13.0 0.06 Max 0.03 max


Properties Thickness Specification
0,2% Proof Stress < 3mm
≥ 3mm
280 MPa (Min)
300 MPa (Min)
Tensile Strength 460 MPa
Elongation in 50mm G.L ≤ 4.5mm
> 4.5mm
18% (Min)
20% (Min)
Charpy Impact V 20ºC
Hardness < 12mm
≥ 12mm
220 HB
250 HB

Possible Alternative Grades

Possible alternative grades to grade 3CR12 stainless steels are given in table.


Why it might be chosen instead of 3CR12


Better corrosion resistance and fabrication properties are required.


Better corrosion resistance and appearance is required. Weldability not needed.

Galvanised steel

A lower cost is required, and the reduced corrosion resistance and
fabrication characteristics of galvanised steel are acceptable.

Weathering steel

A lower cost is required, and the reduced corrosion resistance and
fabrication characteristics of weathering steel are acceptable.

Corrosion Resistance

3CR12 is effective in many applications where carbon steel, galvanised, aluminised or painted steel or aluminium give unsatisfactory life. It is not attacked by strong alkalies, and often gives adequate resistance in acidic conditions.

3CR12 strongly resists chloride stress corrosion cracking, but is less resistant than 304 to pitting and crevice corrosion in chloride environments. 3CR12 is likely to resist water with chloride contents of up to 150 to 200 mg/L at ambient temperatures. The presence of sulphate or nitrate ions will reduce the corrosivity of chlorides. Light surface rust can form in many atmospheres, making the material unsuitable for decorative applications.

Heat Resistance

In air 3CR12 offers scaling resistance to 600°C continuous or 750°C intermittent, but if under stress the temperature should be limited to 450°C continuous or 600°C intermittent. 3CR12 suffers negligible embrittlement after extended exposure at temperatures of 450-550°C; it can be used safely at these temperatures without loss of room temperature impact resistance.

Heat Treatment

Annealing – heat to 700-750°C, soak for 1½ hours per 25mm section. Air cool. The maximum temperature of 750°C should not be exceeded. Annealing should usually be followed by pickling and passivating.

This grade should not be hardened by heat treatment; quenching treatments may reduce the corrosion resistance and mechanical properties.


3CR12 can be readily welded using similar techniques to austenitic stainless steels. Low heat input processes are preferred – particularly GTAW (TIG) and GMAW (MIG). Filler wire pre-qualified by AS 1554.6 (3CR12 referred to as “4003”) is grade 309, but 309L, 309Mo, 316L and 308L have been successfully used. Argon plus 1-2% oxygen shielding gases are recommended. Discolouration of the weld should be removed by pickling, except possibly in wear applications; effective purging and use of backing gases is often a better option.


3CR12 has a machinability similar to that of grade 430, ie about 60% of that of mild steel. The work hardening rate is lower than that of austenitic stainless steels, so reducing the need for special machining techniques.


3CR12 is available in standard HRAP (Hot Rolled Annealed and Pickled) finish in plate, and 2B or 2D in coil. “Black” finish is also produced; this is hot rolled and with the high temperature scale left on the steel. The resulting dark oxidised surface has good low friction characteristics and a corrosion resistance that is useful for many wear applications, even although slightly less resistant than the “white” pickled finish.


3CR12 is a particularly recommended for use on moderately aggressive environments found in the construction, industrial, marine, mining and mineral
processing fields. It provides a cost effective solution to corrosion, oxidation and corrosion/abrasion problems in a wide range of environments. Typical examples include:

• Ore Cars
• Pipe & Tube for Slurry Handling
• Coal Chutes and Liners
• Storage Bins and Hoppers
• Locomotive Bodies
• Ash Handling
• Masonry Fixings
• Coal Wash Plant Structure
• Conveyor Decking
• Sand – Chutes Dredging
• Screw Conveyors

Steel Plate Product:

29 thoughts on “3Cr12 Stainless Steel Plate

  1. Ping-balik: Plat Durinox™ F12N | Jual Besi&Baja

  2. Ping-balik: Stainless Steel 304 Plat | Jual Besi&Baja

  3. Get up to 100000 forum backlinks with our backlinks service & massive targeted traffic

    Get amazing web traffic using superb backlink blast today. We can post your marketing message up to 100’000 forums worldwide, get insane amount of backlinks and as a result incredible free, targeted web traffic from search engines in very short time.

    Most affordable and most powerful service for web traffic and backlinks in the world!!!!

    Your post will be published up to 100000 forums worldwide your website or blog will get instant traffic and massive increase in seo rankings just after few days or weeks, so your site will get targeted long term traffic from search engines.

  4. Ping-balik: Jual 201 Stainless Steel « Jual Besi&Baja

  5. It’s actually a great and helpful piece of info. I’m happy that
    you simply shared this helpful information with us.
    Please keep us informed like this. Thanks for sharing.

  6. I do not leave a lot of comments, however i did
    a few searching and wound up here 3Cr12 Stainless Steel Plate | Besi Baja Indonesia.
    And I do have a couple of questions for you if it’s allright. Is it only me or does it seem like a few of the remarks look like they are coming from brain dead people? 😛 And, if you are posting on other online sites, I’d
    like to follow everything new you have to post. Could
    you make a list of every one of all your social pages like
    your linkedin profile, Facebook page or twitter feed?

  7. This site was… how do you say it? Relevant!
    ! Finally I have found something that helped me. Cheers!

  8. If you are going for most excellent contents like I do, just pay
    a quick visit this website every day for the reason that it offers quality contents, thanks

  9. Hi! Someone in my Facebook group shared this website with us so I came
    to take a look. I’m definitely loving the information. I’m book-marking and will be tweeting this to my followers!
    Exceptional blog and wonderful style and design.

  10. Hello! Are you aware should they make any plugins to assist with SEO?
    I’m hoping to get my web log to rank for some targeted keywords
    but I’m perhaps not seeing great gains. Knowing of any please share.
    Be thankful!

  11. Hey! Quick question that’s entirely off topic. Do you know how to make your site mobile friendly? My blog looks weird when viewing from my apple iphone. I’m trying to find a template or plugin that
    might be able to fix this problem. If you have any suggestions, please share.
    Many thanks!

  12. magnificent issues altogether, you simply received a
    logo new reader. What could you recommend in regards to your submit that you simply made some days ago?
    Any certain?

  13. Thank you for the auspicious writeup. It in fact was a amusement account it.
    Look advanced to far added agreeable from you! However, how
    could we communicate?

  14. Hello! I know that is notably off topic but I was wondering
    which web log platform are you currently using for this site?
    I’m getting sick and tired of WordPress because I’ve had difficulties with hackers
    and I’m looking at options for yet another platform.
    I would be great if you could point me in the direction of
    an excellent platform.

  15. Getting rid of unwanted weight will be particularly tough
    for most persons and often that is because many people expect to have gains much too rapidly.
    If you believe it had taken a number of years to put on this additional extra
    fat then it makes sense that it will take a lot of effort to
    get rid of it again. In the event that you really want to be
    effective then you have got to allow it more time.
    A person may make it just a little easier by using a product like health to
    lessen cravings and get through the day time without having feeding on a bunch
    of fattening goodies.

  16. This is very fascinating, You’re an overly skilled blogger. I’ve
    joined your rss feed and stay up for seeking extra
    of your fantastic post. Additionally, I’ve shared your web site in my social networks

  17. Hey! I understand this is sort of off-topic however I needed to ask.
    Does operating a well-established blog such as
    yours require a lot of work? I am brand new to operating a blog but I do write
    in my diary everyday. I’d like to start a blog so I can share my personal experience and thoughts online. Please let me know if you have any recommendations or tips for brand new aspiring blog owners. Appreciate it!

  18. Hey! Some body within my Facebook group shared this amazing site
    around so I stumbled on look it over. I’m
    positively loving the info. I’m book-marking and will be tweeting this to my followers!
    Superb web log and great design and style.

  19. Hey! I know this is kind of off topic but I was wondering
    if you knew where I could get a captcha plugin for my comment form?
    I’m using the same blog platform as yours and I’m having trouble finding one?

    Thanks a lot!

  20. You could definitely see your skills in the article you write.
    The world hopes for more passionate writers such as you who are
    not afraid to mention how they believe. Always follow your heart.

  21. Wonderful blog! Do you have any tips and hints for
    aspiring writers? I’m hoping to start my own website soon but I’m a little lost on everything.

    Would you recommend starting with a free platform like WordPress or go for a paid option?
    There are so many choices out there that I’m totally overwhelmed .. Any ideas? Many thanks!

  22. Excellent job. I truly enjoyed what you had to say, and much more than
    that, the method that you presented it. Too cool!

  23. Heya i’m for the first time here. I came across this board and I find It really useful & it helped me out much. I hope to give something back and aid others like you aided me.

  24. Excellent blog you have here.. It’s hard to find high quality writing like yours nowadays. I truly appreciate people like you! Take care!!

  25. It is the best time to make some plans for the future and it’s time to be happy. I have read this post and if I could I want to suggest you few interesting things or tips. Maybe you can write next articles referring to this article. I want to read more things about it!

  26. Whatsoever kind of company you want to build
    your site regarding, essentially the most probably hardest choice is to find a
    web hosting service firm. Hostgator coupon april 2012 greathostgatordeal
    you can get $9. The affiliate coupon codes can easily be found
    on affiliate internet sites.

  27. Not listed as a separate part is a gasket in
    the bottom of each blade. Cut the red bell pepper into 1 inch pieces, chop the red onion, and shred
    the carrots into the mixing bowl with the other vegetables and chicken.

    Waldorf salad is one such salad that is an amalgamation of celery,
    apples, walnuts, and mayonnaise.

Tinggalkan Balasan

Isikan data di bawah atau klik salah satu ikon untuk log in:

Logo WordPress.com

You are commenting using your WordPress.com account. Logout /  Ubah )

Foto Google

You are commenting using your Google account. Logout /  Ubah )

Gambar Twitter

You are commenting using your Twitter account. Logout /  Ubah )

Foto Facebook

You are commenting using your Facebook account. Logout /  Ubah )

Connecting to %s